Adding a Point Leak Detector Sensor is very simple.
Step 1: Physically Connect the Sensor
Connect the sensor to your Control unit’s Sense Port (GREEN).
Safely secure the sensor in your aquarium, ensuring that the sensor cannot become dislodged.
Step 2: Create the INPUT Sensor
From the STATUS screen, tap the three horizontal dots to the right of the INPUTS label.
Select “Add New Input”
Tap on the + symbol in the bottom-right corner
Enter the name you wish to assign to your input and tap “Create.”
Step 3: Configure INPUT Sensor
Type: Select Sense Port
Sense Mode: Select Point Leak Detector
Sense Port: Select the port number where you physically connected the input sensor
Notification Level: This option lets you specify the notification level you want to receive.
Alert When: You can choose the state for receiving notification alerts. For instance, do you want to be notified when the sensor is wet or dry?
Is Invisible: If you choose to hide the input from the status screen, it will only become visible on pages that have “Show Invisible” selected.
Step 4: Upload Changes
Once you have configured your INPUT, tap on the yellow bar at the bottom of the screen to upload your changes to the cloud and the individual HYDROS devices.
Rename Input & Change Icon
From the STATUS screen, tap on the Input you wish to modify.
On the popup, tap on the “Gear” icon on the bottom right.
From the Input setup page, tap on the “Pencil” icon on the top left.
Type in the new name you wish
If you wish to change the default icon, please tap on “Change Icon.”