The HYDROS DC Solenoid Valve works with an aquarium controller and water level sensor to add fresh RO or RO/DI water to the tank or sump when the water level is low.
The HYDROS DC Solenoid Water Valve helps control water flow for reverse osmosis systems. It can be easily connected to a Drive Port on a HYDROS device and does not require an additional power source for operation.
The HYDROS DC Solenoid Valve works with an aquarium controller and water level sensor to add fresh RO or RO/DI water to the tank or sump when the water level is low.
Turn water flow on or off for reverse osmosis systems
Use the solenoid to refill your tank without needing a separate ATO reservoir in your RO filter
Easily connects to standard RO tubing with 1/4″ push-connect fittings
Powered by plugging into a Drive Port on a HYDROS Control
Official CoralVue HYDROS Accessory
One (1) year warranty
Solenoid Valve
HYDROS Drive Power Cable
Applicable with the following HYDROS Devices:
Voltage: DC 12V
Pressure: 0-0.7 MPA
Follow our step-by-step instructions to add a Solenoid Valve to your HYDROS App and Control.
