It’s never been easier to add sensors to your network! There’s no need for coding, debugging or complicated workarounds and it declutters your system by removing the nest of multiple wires, power sockets, and modules. Connect temperature sensors, leak detectors, skimmer sensors, and more to the Sense Port.
The HYDROS Drive Port is a universal output port that provides 12V DC power that you can turn on or off. Run all kinds of aquarium devices like small motors, pumps, fans, low wattage lights, and more. Get instant notifications if the drive ports don’t respond and save yourself the grief of a disaster. Now that’s smart!
Digital Galvanic Isolation (DGI) prevents signal interference by converting it to the digital domain. The signals are then converted into usable data for reference.
The amazing technology behind the HYDROS Control 4 Probe Ports is truly extraordinary! The circuitry has an ultra-high-quality input clip that is specifically designed to receive small electrical signals for these types of probes! Each Probe Port or “input” provides DGI from the rest of the system.
One of the greatest features of HYDROS Control 4 is the 0-10V ports. The 0-10V Port applies a voltage between 0- and 10-volts DC to produce varying intensity levels. The Control 4 includes two different 0-10V ports – one is a 0-10V “IN” and the other is a 0-10V port “OUT.”
The HYDROS Command Bus is used to interconnect multiple HYDROS devices together through CANbus technology to form what we call the Collective.
2 - Command Bus
2 - Drive Ports
4 - Sense Ports
2 - In/Out 0-10V
2 - pH/ORP Probe Ports
2 - Command Bus
2 - Drive Ports
4 - Sense Ports
1 - pH/ORP Probe Port
1 - Salinity Probe Port
4 - Dosing Pumps
2 - Command Bus
4 - Pump Outputs
2 - In/Out 0-10V Port
Becomes Power Source For HYDROS Controllers