Add Test Regimen

You must establish a Test Regimen schedule for HYDROS to perform Alkalinity tests and update your “Sampled” pH and Salinity inputs.

Step 1: Create the Test Regimen Schedule

1. From the main menu, tap on “SCHEDULES.”
2. Tap the + symbol at the bottom right and enter your Presets name.
3. Tap Create

Step 2: Configure the Schedule

• Type: Test Regimen.
• Tester: Select Tester.
• Active in Modes: Select the modes you want the test to “automatically” trigger.
  
  TIP: We recommend utilizing the Normal mode for this scenario, allowing the testing to occur seamlessly during regular daily usage.
• Schedule: You can create a simple or complex schedule to run the output. 
  • Starting Time of Day – It specifies the starting time of the schedule
    
    EXAMPLE: If you want the output to turn ON at 8 am, STARTING TIME OF DAY = 08:00.  If you want the output to turn ON at midnight, then STARTING TIME OF DAY = 00:00
  • Run Time (How long will the output stay ON) – This specifies HOW LONG a selected output will run
    
    EXAMPLE: If you want the output to turn ON for 10 minutes every hour, then your RUN TIME = 10 min
  • Run Count (How many times should it repeat?) – This specifies HOW MANY TIMES the “RUN INTERVAL” will consecutively repeat
    
    EXAMPLE: If you want the outlet to turn ON for 10 minutes every hour, from 8 am to 10 pm, then your RUN COUNT = 14
  • Run Interval (How often do you want the interval to repeat) – This is the sum of the RUN TIME plus the OFF time BEFORE it repeats itself
    
    EXAMPLE: If you want the output to turn ON for 10 minutes every hour, then your RUN INTERVAL = 60 min
• Depends On: You can turn the SCHEDULE on/off depending on the status of another output. Select from the list of available outputs to activate this function.  
  • OFF if OFF: If the output on which the schedule depends is turned off, the schedule will also be turned off.
  • OFF if ON: If the output on which the schedule depends is turned on, the schedule will be turned off.

Step 3: Upload the Changes

• After configuring the output, tap the yellow bar at the bottom to upload your changes to the cloud and each HYDROS device.