HYDROS allows you to input manual test readings to keep track of your tank’s health. The inputted values are plotted into a graph.
WARNING: Static Inputs cannot be used to trigger outputs. They are display-purpose only.
Step 1: Create Static Input
- From the STATUS screen on the app, tap on the three horizontal dots to the right of the INPUT label and select “Add / Edit New Input.”
- Type the name of the input and tap on “Create.”
Step 2: Configure your Static Input
- Type: Static Input
- Unit: Select the units of measurement you wish to display in the STATUS screen.
- Safe Range: You can use this feature to establish a secure range by specifying the minimum and maximum values. If the reading exceeds this range, HYDROS will inform you through notifications, which you can enable.
- Graph Value Limits: You can set the minimum and maximum values that appear on the Graphs view.
- Is Invisible: If you choose to hide the input from the status screen, it will only become visible on pages that have “Show Invisible” selected.
Step 4: Upload the Changes
After configuring the input, tap the yellow bar at the bottom to upload your changes to the cloud and each HYDROS device.
Rename Input & Change Icon
- From the STATUS screen, tap on the Input you wish to modify.
- On the popup, tap on the “Gear” icon on the bottom right.
- From the Input setup page, tap on the “Pencil” icon on the top left.
- Type in the new name you wish
- If you wish to change the default icon, please tap on “Change Icon.”